Datamax-oneil DPL Programmer’s Manual User Manual download pdf (Page 88)

Extended System-Level Command Functions

(PO) Paper Empty – This command sets the length of travel before an out of stock

condition is declared.

(PP) Parallel Direction – This command controls the parallel port communications

settings:

Value Parallel Direction Units / Interpretation

x = Port ID

z = Direction: U (unidirectional – one-way communication); or,

B (bidirectional – IEEE 1284 back-channel operation).

(PS) Present Sensor Equipped – This command allows the printer to sense the

present sensor option. A (or Y) - automatically senses device presence; if

undetected, no error will be generated. E - enables the device, where its presence

must be detected; otherwise, a fault is generated. N or D - disables device detection.

See <STX>V for command details.

(pS) Print Speed – See Label Formatting Command Function P for details.

(PT) Tear Position – This command sets the label stopping location at the tear

plate on the printer’s cover.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 295 296

No comments

Datamax-oneil DPL Programmer’s Manual User Manual Page 88