Datamax-oneil H-Class HD Cutter Option User Manual

Cutter Option 92-2469-01 Rev.B

8 6) Place the Cover and the two Rear Shields onto the Mechanism, and then secure all with the four Cover Screws. RearShieldsCoverMechanismCoverScrew

9 Testing the Cutter Diagnostics allow the function of the option to be tested by executing and displaying a count of cutting attempts. Follow the

1 Overview This document describes the installation, use and care of the Cutter option for wide model H-Class printers. After taking a moment to ve

2 2) Raise the cover and remove media. Remove the Panel, Thumbscrews and Tear Bar. PanelTear BarThumbscrews 3) Separate the Hinge Plate fro

3 5) Mount the Cutter Assembly onto the Mounting Pins of the Hinge Plate. HingePlateCutterAssemblyMountingPins 6) Plug the Cutter Cable int

4 2) Close the cover then plug the power cord into the AC Receptacle and turn ON the Power Switch. AC ReceptaclePower Switch 3) Press the FE

5 Increasing Small Label Throughput CUT BEHIND is a menu setting that allows the printer to queue then cut a specified number (0 – 2) of small labels

6 Maintaining the Cutter To ensure trouble free operation, the Cutter should be cleaned (using the items listed below) after printing each roll of

7 3) Remove the four Cover Screws and two Rear Shields from the Cutter Assembly. Cover ScrewsRear ShieldsCutter Assembly (Cabling not shown