Datamax-oneil DPL Programmer’s Manual User Manual download pdf (Page 126)

Label Formatting Command Functions

118

m Set Metric Mode

This command sets the printer to measure in metric. When this command is sent, all

measurements will be interpreted as metric values, (e.g., a column offset of 0010 will be

interpreted as 1.0 mm).

Syntax:

Sample:

141100001000100SAMPLE LABEL<CR>

The sample above prints the text (SAMPLE LABEL) starting at

location coordinates 10.0 mm, 10.0 mm.

n Set Inch (Imperial) Mode

This command sets the printer to measure in inches. When this command is sent, all

measurements will change to inches. Default mode, and is menu selectable.

Syntax:

Sample:

141100001000100SAMPLE LABEL<CR>

The sample above prints the text (SAMPLE LABEL) starting at

location coordinates 1.0 inch, 1.0 inch.

P Set Print Speed

This command sets a print speed for a label or batch of labels.

Syntax:

Where:

Is a single character representing a speed; see

Appendix L for valid ranges.

Sample:

<STX>L

141100001000100LABEL1<CR>

<STX>L

141100001000100LABEL2<CR>

The sample above prints two labels, the first at a speed of 2

inches per second (51 mm per second) and the second at the

default setting.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 295 296

No comments

Datamax-oneil DPL Programmer’s Manual User Manual Page 126