Datamax-oneil LP3 LABEL PRINTER User Guide User Manual

LP3 LABEL PRINTER110149-006User Guide

LP 3 LABEL PRINTER USER'S GUIDE7Loading Printable MediaUse the following procedure to load printable media:1. Move the printer so that the front

SETTING UP YOUR PRINTER86. Push the media as far back as possible on the spindle so that the edge of the media roll is aligned with the media “rib” of

LP 3 LABEL PRINTER USER'S GUIDE910. Close the printer's printhead cover. The printer's printhead cover “snaps” into place when complete

SETTING UP YOUR PRINTER10Using the Label PresenterUse the following procedure to separate linered media using the label presenter:1. Install the liner

LP 3 LABEL PRINTER USER'S GUIDE117. Pull the slack from the media and close the label presenter (Figure 26). 8. Press the Media Function button s

SETTING UP YOUR PRINTER12Printing a Self-Test1. Press and hold the power button for approximately three (3) seconds until printing begins. For informa

LP 3 LABEL PRINTER USER'S GUIDE13Removing a Data Cable1. Tilt the printer on its side so that the printer's data port is visible (Figure 30)

SETTING UP YOUR PRINTER14Bluetooth and/or 802.11b ParametersYour printer is configured with default factory settings. To determine your printer's

LP 3 LABEL PRINTER USER'S GUIDE15Using the Control PanelThe tables on the following pages document the following:• Audio Indicators on page 15• B

USING THE CONTROL PANEL16Battery Status LED Battery Status LEDDescription ActionRed (solid):The batteries have less than 5% power.• If A/C power is n

LP 3 LABEL PRINTER USER'S GUIDE17Power Button/LED Media Function Button/LED Orange, red, or green flash - fastWhen the AC adapter is plugg

USING THE CONTROL PANEL18Radio Button/LED * If the signal quality option is on (default is off) and the printer is awake, the amount of time the

LP 3 LABEL PRINTER USER'S GUIDE19Maintenance and TroubleshootingMaintenance Guidelines• Keep the printer in a cool, dry place, away from direct s

MAINTENANCE AND TROUBLESHOOTING20TroubleshootingHelp DeskIf you need additional assistance, please contact Datamax-O’Neil at (949) 458-0500. Please ha

LP 3 LABEL PRINTER USER'S GUIDE21SuppliesMedia SuppliesDatamax-O’Neil offers many certified grades of paper for use in the printer. Our certified

22LP 3 LABEL PRINTER USER'S GUIDEAgency ApprovalsFCC NoticeThis equipment has been tested and found to comply with the limits for a Class B digit

23LP 3 LABEL PRINTER USER'S GUIDE

24LP 3 LABEL PRINTER USER'S GUIDECopyrightThis manual and any examples contained herein are provided “as is” and are subject to change without no

COPYRIGHT © 2010, DATAMAX-O’NEIL

TABLE OF CONTENTSLabel Printer Views... 1Front View... 1Back View

LP 3 LABEL PRINTER USER'S GUIDE1Label Printer ViewsFront ViewBack ViewPrinthead cover (arrow) buttonsControl panelPrinthead coverHandle strapData

LABEL PRINTER VIEWS2Right Side ViewLeft Side ViewMedia ringMedia cavitySecurity cover/802.11X slot/Bluetooth slotFigure 3Power portBattery 2 cavityBat

LP 3 LABEL PRINTER USER'S GUIDE3Setting Up Your PrinterUse the following information to set up your printer:• Unpacking Your Printer on page 3• I

SETTING UP YOUR PRINTER44. Position the battery with its contacts facing up. The battery contacts should face toward the back of the battery cavity (F

LP 3 LABEL PRINTER USER'S GUIDE5Charging the BatteriesIf the batteries are low when the printer turns on, the battery status LED displays red. Fo

SETTING UP YOUR PRINTER6Determining the Batteries' ConditionThe battery status LED displays the batteries' condition. When the battery statu