Peel & Present Option 92-2479-01 Rev.E
8 Remove Upper Roller Shaft and associated Rollers. Clean all surfaces of the Rollers and the Upper Roller Shaft. Isopropyl Alcohol can be us
1 Contents of the Peel & Present Kit This kit contains the following items: Peel and Present Mechanism Assist Roller and Bushing N
2 Using a #2 Philips head screwdriver, remove the Screw that secures the Side Plate to the printer. Remove the Side Plate. Side Plate
3 Insert the Bushing completely into the Bearing Block. Bearing BlockBushingAssist Roller While holding the Assist Roller Be
4 Ensure that the Leveling Cam is loose, and then close and latch the Printhead Assembly. While pushing down on the Printhead As
5 Loading Media With the Peel and Present option, labels printed in a batch will be automatically be separated from the backing material and dispens
6 Route the Backing Material under the Assist Roller and around the Internal Rewinder, as shown below. Backing MaterialRetainerSlotsThumbscrewMed
7 Setup, Configuration, and Operation The Peel and Present option is plug and play; no setup or configuration is required. As soon as power is
Comments to this Manuals