Datamax-oneil Windows CE 5.0 Thermal Printer Driver User Manual download pdf

O’Neil Windows CE 5.0

Thermal Printer Driver

1 Overview

This driver allows you to print from your Windows CE 5.0 device to an O’Neil thermal printer

via the standard Windows printing mechanism.

2 Installation

To install the print driver to your device, copy the “ONeil PrinterDriver.CAB” file to the device

and double click on it. You will be asked for the location you want the driver files installed to.

Figure 1: Instillation Directory Prompt

Once you have chosen the location, the files will be copied and the registry entries will be added

so that the next time you print the “O’Neil Thermal” printer will be presented along with the

other printer drivers installed on your system.

1 2 3 4 5 6 7 8

O’Neil Windows CE 5.0 Thermal Printer Driver 1 Overview This driver allows you to print from your Windows CE 5.0 device to an O’Neil thermal printer

3 Configuration After the driver has been installed you must configure it to work with your current system setup. The following screens will show how

o 3 Inch (576 dots) o 4 Inch (832 dots) - default EoD Feed: The value represents the amount the paper will be advanced after the end of a print

for bit flip errors. It can detect errors if 1, 3, 5 or 7 bits were altered, but not if 2, 4, 6 bits were. The default is to leave this off. o N –

Figure 5: Wireless Printer Settings Dialog Port: The port for the printer can have a value from 1-65535 and its default value is 515.

4 Printing Now that the printer is configured, printing can be done by selecting print from your application and then pressing the “OK” button. The i

Page 7

Figure 7: Wireless Configuration

A. Output Samples (all margins at 0.5”) Layout Portrait Landscape N Scale to fit Y

No comments

Datamax-oneil Windows CE 5.0 Thermal Printer Driver User Manual