Datamax-oneil H-Class Peel & Present Option User Manual download pdf (Page 3)

Overview

This document describes the contents, installation, and use of the Peel & Present option for the H-Class

printer. After verifying the contents of the kit and the tools needed, follow the steps below to install and

begin using the option. A maintenance procedure is also included, so keep this documentation for future

reference.

CAUTION

For your safety and to avoid equipment damage, always turn ‘Off’ power and unplug the

printer’s power cord before beginning this installation and when performing service.

Contents of the Peel & Present Option

This kit contains the following item:

 Peel & Present Assembly

Tools Required

To install this option, you will need a standard screwdriver.

Step 1: Preparing the Printer

A) Turn ‘Off’ the Power Switch and unplug the

power cord from the AC Receptacle.

AC Receptacle

Power Switch

B) Press down on the Catch, then pull forward to

remove the Door.

Door

Catch

1 2 3 4 5 6 7 8

No comments

Datamax-oneil H-Class Peel & Present Option User Manual Page 3