Datamax-oneil VMP-1000 Paper Tray User Manual download pdf

The Paper Tray Kit (220155-000) comes with the

following (Fig. 1):

• (1) Paper Tray

• (1) Foam Block

• (1) Mounting Instructions

Note: Use Foam Block when a stack of paper is

placed directly in Paper Tray only.

Hardware / Tools required for mounting:

• Drill with 3/16” bit.

• (4) #8 Pan head or Button head screws,

Screw length to be determined by user.

• #1 Phillips screwdriver or 3/32” hex key

(optional)

• Level (optional)

Choosing a location for the Paper Tray:

1. Position the Paper Tray with enough room to

properly place a stack or box of tractor feed

paper.

2. Position the Paper Tray and paper so it is

protected from environmental elements (i.e.

moisture, tools, boxes, etc.).

3. Position the Paper Tray and paper in a

visibly secure area in normal traffic patterns.

4. DO NOT position the Paper Tray above,

near or relative to the driver’s position as to

interfere with normal driving operations.

5. Mount the Paper Tray and paper away

from the driver’s head to eliminate

potential injury in the event of an

accident.

6. Hole centers:

Left to Right = 5”

Up & Down = 5”

Recommended hole diameter for #8 screw is

3/16” (.187”).

Installation of the Paper Tray:

1. NOTE: VMP1000 printer must be installed

first for proper alignment of the Paper

Tray. The alignment of the Paper Tray and

paper to the printer is crucial. It may be

necessary to use a leveling device to locate

the Paper Tray properly.

2. Before mounting the Paper Tray, make sure

there is adequate space between it and the

printer for the amount of paper to be used.

(Fig. 2).

3. Mark the drill location on the mounting

surface (Fig. 3). Be mindful as to what is

on the other side of the mounting

surface. Use a 3/16” drill bit.

4. Select #8 screws to secure the Paper Tray

5. Top of screw head should not interfere with

the paper stack or box of paper.

Note: The length of the screws will vary for each

installation, and is to be determined by user.

Fig. 1

Fig. 2 Fig. 3

1 2

VMP1000 2

Summary of Contents

Page 1

The Paper Tray Kit (220155-000) comes with the following (Fig. 1): • (1) Paper Tray • (1) Foam Block • (1) Mou

Page 2 - VMP1000

5. Paper Tray installed with VMP1000 Dashmount Bracket and Cradle Bracket, with Symbol PDT8100. (Fig.

Comments to this Manuals

No comments

Datamax-oneil VMP-1000 Paper Tray User Manual

Browse online or download User Manual for Printers Datamax-oneil VMP-1000 Paper Tray. Datamax-O'Neil VMP-1000 Paper Tray User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Printers Datamax-oneil VMP-1000 Paper Tray